Vendre Vernis à la cire dabeille - 100% naturel - 30ml boîte de départ ou 250ml plus grande taille

Parrs natural wood finishes believe in manufacturing safe products for you to use and safe for the environment. Most polishes on the market contain toxic chemicals which evaporate into the atmosphere which can cause damage to health and to the world we live in.

Our Bees Wax polish contains only natural ingredients with no additional toxic chemicals.

Our Wax Polish is Voc free and contains no harmful solvents like gum turpentine, toluene, or metal dryers. It also contains no petroleum based products like mineral oil.

Parrs Bees Wax Polish contains 100% of polymerised linseed oil and natural waxes which gives your woodwork a pure natural hardwearing finish. Our polish doesnt contain any solvents it contains 100% oil and wax which when applied to the furniture or wood 100% remain with no evaporation. Other polish can contain harmful solvents which evaporate leaving very little wax on the wood. These solvents are harmful to you and the environment. Please remember a very thin coat is only required so it goes a long way.

Our Wax Polish gives a natural finish which enhances the natural grain of the wood. Our Wax Polish is food safe,Bees Wax Polish penetrates deep into the grain of the wood making it ideal for , internal woodwork(doors, skirtings, architraves) Chopping Boards, Wooden Bowls and Wooden Utensils, existing finished furniture wooden worktops, tables, etc..,smells natural and is good for the environment.

Our Wax Polish is Voc free and contains no harmful solvents or metal dryers. It contains 100% of polymerised linseed oil and natural waxes which gives your woodwork a pure natural finish. Our Wax Polish is food safe, smells natural and is good for the environment.

How to apply Bees Wax Polish. Unfinished wood sand to min 320 grit , remove all dust particles. Existing furniture to be sanded and existing wax removed to your personnel preferences. Place a small amount of polish onto the cloth and begin applying into the surface working your way over the entire piece occasionally adding more polish to your cloth. It is very important that only a small amount of Polish is used and must be well worked into the piece. Leave for a min of 20 min and rub with a clean lint free cloth briskly until the surface feels touch dry. Allow the Wax Polish to cure for a min of 24 hours. Burnish with 0000 steel wool and apply additional coats as necessary.

Please remember a very thin coat is only required so it goes a long way. Our Wax Polish gives a natural finish which enhances the natural grain of the wood. Our Wax Polish is food safe, smells natural and is good for the environment.

Our beeswax polish is not suitable for surfaces which have been previously varnished or lacquered. The surface would need to be sanded down to bare wood.